Bounty Hunter Time Ranger Manuel du propriétaire télécharger pdf (Page 36)

Jewelry Hunting

When targeting jewelry items, consider where these items are commonly

lost. There are many possibilities, including playing fields where a variety

of sports take place, beach areas, playgrounds, and sandboxes.

▲ Recommended mode of operation

Since the main objective when jewelry hunting is to detect all gold

items, the recommended mode of operation is DISCRIMINATION

mode with the following settings.

PRESET Level 3 (P3)

Try using the third level of PRESET (PRESET 3). See the DISCRIMINATION

Mode, To select PRESET targets section of this manual for instructions on

how to select PRESET levels. The third level of PRESET eliminates most

trash items while detecting most all coin types and other possible gold and

silver items similar to the coin types (such as jewelry). Fortunately, most

small gold items fall under the 5¢ indication. Also, make sure that you

accept all 4 levels of iron, since small gold rings may fall in the IRON/FOIL

range. While you will dig up a lot of trash in this setting, you are

guaranteed that no gold items are escaping detection.

Customized target selection

You may also want to customize your selection of targets, depending

on what type of trash you are encountering. For example, if you’re

encountering many pull tabs but very little iron, try eliminating pull

tabs only. See DISCRIMINATION Mode, To customize targets section

of this manual for instructions on how to customize your targets.

When jewelry hunting, it is not uncommon to find

many coins in the process of digging up rings.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 47 48

Pas de commentaire

Bounty Hunter Time Ranger Manuel du propriétaire Page 36